| |
Products |
| Cutting
tools, cutting tool engineering, cutting tool manufacturers, cutting
tool supply, cutting tools inc |
| |
| cutting
tools India, cutting tools manufacturer, cutting tools manufacturers,
taper reamers manufacturers |
| taper
pin reamers manufacturers, taper pipe reamer manufacturer, taper
pin reamer manufacturer
|
| |
Universal
Cylindrical & Internal Grinding Machines |
| |
|
SG-450
|
|
SG-300
INT |
|
|
|
....... |
|
....... |
SG-600
HYD |
|
SG-1500 |
|
|
|
| |
|
|
|
| Special
Features |
| |
| BED
|
The
one piece bed is made of special cast iron provided
with strong ribbing for rigidity and a large inverted
well - seasoned and vide track for the table. All
the slide ways are ground, on an imported highly
sophisticated slide ways grinder to ensure the accuracy
of highest order. The casting is accomplished with
high grade casting with appropriate alloying elements
in ensure to hardness and durability. |
| ....
|
| TABLE
|
Compounds
of two parts (Lower slide having Vee & flat
ways and the upper swivelling table) can be adjusted
for taper grinding also. Taper grinding is effected
by means of a fine adjustment screw & scale.
Two adjustable stops are provide for limiting longitudinal
table travel. |
| ....
|
| WORKHEAD
|
It
is detachable and built for grinding both with revolving
and stationery center. Power for transmitted through
V-Belts, from a balanced electric motor, fitted
on it thus avoiding vibration. Four speeds are available
to suit different types of jobs. The workhead can
be swivelled upto 90° towards wheels and 30°
towards operator for taper conical and face grinding. |
| ....
|
| TAILSTOCK
|
The
Tailstock, designed to travel easily on the table,
is equipped with a center carrying spindle traveling
in a perfectly honed bore. The tail stock spindly
is spring traveling in a perfectly honed bore. The
Tailstock spindle is spring loaded adjustable by
means of a knurled knob and is operated through
lever plus rack gear. A slight rotation of the handle
on front of tailstock, displace the tailspindle
to the rear, thus allowing rapid removal of the
workpiece and the insertion on new workpiece No.
3 or 4 tapers center may be fitted in the tailspindle
as per the specifications and size. |
| ....
|
| WHEELHEAD
|
The
wheelhead is designed to raise the efficiency level
for operation, decrease overhang and eliminate vibration.
The complete unit can be swivelled upto 60°
on either side. Wheel spindle can be supplied with
taper roller on bronze bearing if specially required.
The spindle is driven by a balanced electric motor
through V-Belt. Grinding wheel is fitted on the
spindlenose end meant for the purpose mounted on
a wheel flange In feed movement is obtained through
rotation of hand wheel. |
| ....
|
| INTERNAL
GRINDING ATTACHMENTS |
The
machine is attached internal grinding attachment
driven with independent motor fitted on it through
a plain endless belt giving the vibration free highest
efficiency. This is also suitable for grinding cylindrical
and taper holes. |
|
|
| |
|
|
| Model
No. |
SG-300 |
SG-450 |
SG-600 |
SG-1000 |
SG-1500 |
SG-2000 |
SG-300 INT |
| Max.
Grinding Length |
300mm |
450mm |
600mm |
1000mm |
1500mm |
2000mm |
150mm |
| Center
Height |
140mm |
140mm |
140mm |
165mm |
165mm |
165mm |
175mm |
| Max.
Work Dia. Ground |
270mm |
270mm |
270mm |
325mm |
325mm |
325mm |
|
| Table
Feed |
Mech./Hyd. |
Mech./Hyd. |
Mech./Hyd. |
Mech./Hyd. |
Mech./Hyd. |
Mech./Hyd. |
Mech./Hyd. |
| Max.
Swivel of Table |
7° |
7° |
7° |
7° |
7° |
7° |
|
| WORK
HAED AND TAIL STOCK
|
No.
of Speed of
Work Head Spindle |
4 |
4 |
4 |
4 |
4 |
4 |
3 |
Morse
Taper in
Workhead |
MT-3 |
MT-3 |
MT-3 |
MT-4 |
MT-4 |
MT-4 |
MT-4 |
| Swivel
of Workhead |
90° |
90° |
90° |
90° |
90° |
90° |
60° |
Morse
Taper in
Tailstock |
MT-3 |
MT-3 |
MT-3 |
MT-4 |
MT-4 |
MT-4 |
|
Work
Head Motor
960 RPM |
75
H.P. |
75
H.P. |
75
H.P. |
75
H.P. |
75
H.P. |
75
H.P. |
75
H.P. |
| GRINDING
WHEEL HEAD AND TABLE FEED |
| Grinding
Wheel |
14"x1-1/2"x5" |
14"x1-1/2"x5" |
14"x1-1/2"x5" |
16"x1-1/2"x5" |
16"x1-1/2"x5" |
16"x1-1/2"x5" |
|
Grinding
Head Motor
1440 RPM |
3 H.P.
|
3 H.P.
|
3 H.P.
|
5 H.P.
|
5 H.P.
|
5 H.P.
|
|
| Wheel
Head Swivel |
60° |
60° |
60° |
60° |
60° |
60° |
|
Table
Feed Motor
960 RPM |
75
H.P. |
75
H.P. |
75
H.P. |
75
H.P. |
75
H.P. |
75
H.P. |
|
No.
of Speed of
Table Feed |
3 |
3 |
3 |
3 |
3 |
3 |
|
| INTERNAL
GRINDING ATTACHMENT |
Grinding
Spindle
outer Diameter |
60mm
|
60mm
|
60mm
|
60mm
|
60mm
|
60mm
|
60-80mm |
| Max.
Quill Length |
80mm
|
80mm
|
80mm
|
100mm
|
100mm
|
100mm
|
|
| Quill
Diameter |
15mm
|
15mm
|
15mm
|
18mm
|
18mm |
18mm |
|
Min.
& Max. Dia.
of Hole Grinding |
16-100mm |
16-100mm |
16-100mm |
19-125mm |
19-125mm |
19-125mm |
5-120mm |
| Spindle
Speed |
16000
RPM |
16000
RPM |
16000
RPM |
16000
RPM |
16000
RPM |
16000
RPM |
9000
- 18000 |
Internal
Grinding
Attachment Motor
2800 RPM |
1.5
H.P. |
1.5
H.P. |
1.5
H.P. |
1.5
H.P. |
1.5
H.P. |
1.5
H.P. |
|
| COOLANT
& HYDRAULIC TANK
|
| Cap.
of Coolant Tank |
165
Ltrs. |
165
Ltrs. |
165
Ltrs. |
165
Ltrs. |
165
Ltrs. |
165
Ltrs. |
|
| Coolant
Tank Motor |
0.10
H.P. |
0.10
H.P. |
0.10
H.P. |
0.10
H.P. |
0.10
H.P. |
0.10
H.P. |
0.10
H.P. |
| Cap.
Hydraulic Tank |
75
Ltrs. |
75
Ltrs. |
75
Ltrs. |
75
Ltrs. |
75
Ltrs. |
75
Ltrs. |
|
Hydraulic
Tank Motor
1440 RPM |
1 H.P.
|
1 H.P.
|
1 H.P.
|
1 H.P.
|
1 H.P.
|
1 H.P.
|
|
| WEIGHT
|
| Approx.
Gross Weight |
2000
Kgs |
2500
Kgs |
2950
Kgs |
3300
Kgs |
4000
Kgs |
4300
Kgs |
2000
Kgs |
|
| |
| Standard
Equipments : |
With
all Electrical i.e. Motors & Electrical Panels, Coolant
Pump & Tank with Piping Grinding Wheel with One Flange,
One Dresser with Dresser Holder, One Lamp, 2 Dead Centres,
Water Guards, Wheel Spanner & Puller. |
|
Extra Accessories :
|
| Two
Point Steady Rest, Three Point Steady Rest, Wheel Balancing
Stand with Arbour, True Chuck, Independent Chuck, Magnetic
Coolant Separator, Radius Dressing Attachment |
|
|
|
| |
|
|
|
|
| |
| ..........
|
All
Specifications are subject to change towards improvements without
any prior notice. |
|
| |
|
|
|
